LPG Filling Station
Parameter Category Specifications
Design Capacity Daily filling volume: 5,000–20,000 Nm³ (customizable to 2,000–50,000 Nm³ for special projects)
Storage System Aboveground / underground LPG storage tanks; Volume: 5–200 m³; Design pressure: 1.77 MPa
Dispenser Configuration 2–8 LPG dispensers; Single-nozzle flow rate: 5–20 kg/min; Support metering, IC card / mobile payment
Process Pressure Storage pressure: 1.6 MPa; Filling pressure: 1.0–1.2 MPa
Design Temperature -40℃ ~ 50℃
Safety System Emergency shut-off valves, leak detection and alarm, overpressure relief, fire sprinkler, explosion-proof electrical system
Material & Anti-Corrosion Tanks: Q345R / 16MnDR; Piping: 20# / 304 stainless steel Aboveground equipment: Sa2.5 + epoxy zinc-rich primer + topcoat Underground tanks: 3PE coating + cathodic protection
Application Scenarios Urban buses, taxis, logistics fleets, civil and industrial & commercial LPG refueling
LPG Filling Station
Parameter Category Specifications
Design Capacity Daily filling volume: 5,000–20,000 Nm³ (customizable to 2,000–50,000 Nm³ for special projects)
Storage System Aboveground / underground LPG storage tanks; Volume: 5–200 m³; Design pressure: 1.77 MPa
Dispenser Configuration 2–8 LPG dispensers; Single-nozzle flow rate: 5–20 kg/min; Support metering, IC card / mobile payment
Process Pressure Storage pressure: 1.6 MPa; Filling pressure: 1.0–1.2 MPa
Design Temperature -40℃ ~ 50℃
Safety System Emergency shut-off valves, leak detection and alarm, overpressure relief, fire sprinkler, explosion-proof electrical system
Material & Anti-Corrosion Tanks: Q345R / 16MnDR; Piping: 20# / 304 stainless steel Aboveground equipment: Sa2.5 + epoxy zinc-rich primer + topcoat Underground tanks: 3PE coating + cathodic protection
Application Scenarios Urban buses, taxis, logistics fleets, civil and industrial & commercial LPG refueling
- Compliance & Certification: Fully compliant with PED 2014/68/EU, EN 13445, ADR, ATEX directives. CE certification, TÜV / DNV third-party inspection reports are available to meet EU gas equipment and safety regulations.
- Environmental & Energy Efficiency:
- Low-emission design: LPG as a clean fuel matches EU carbon emission reduction and air quality control requirements; equipped with vapor recovery system to reduce VOC emissions.
- High-efficiency heat exchange and insulation to minimize LPG evaporation loss, in line with EU energy efficiency directives.
- Smart Operation & Maintenance: Support remote monitoring, data acquisition and predictive maintenance, compatible with European smart energy management platforms to improve operational efficiency.
- North American Market:
- Compliant with ASME Section VIII, NFPA 58, API 620 standards; U-stamp and CRN registration available, suitable for US and Canadian gas safety codes.
- Modular skid-mounted design for fast deployment and relocation, ideal for distributed energy and remote fleet refueling.
- Latin American Market:
- Cost-effective: Competitive pricing while meeting international standards, suitable for infrastructure construction budgets in Latin American countries.
- Enhanced weather resistance: Upgraded UV and salt-spray corrosion resistance for tropical / subtropical climates in Brazil, Mexico, etc.
- Localized support: Spanish / Portuguese technical documentation and on-site training to reduce operation and maintenance difficulty.
- Adaptation to Hot & Humid Environments:
- Tanks and pipelines adopt high-weatherability anti-corrosion system (epoxy zinc-rich + fluorocarbon topcoat) to resist high temperature, humidity and salt spray, suitable for coastal and rainforest climates in Indonesia, Malaysia, etc.
- Optimized anti-evaporation: Tank insulation and vapor recovery system reduce LPG loss and improve operating profit.
- Fast Delivery & Small-batch Customization:
- Standard skid-mounted modules shorten delivery and installation cycle; small-scale stations (2,000–5,000 Nm³/day) available for mass supply, matching urban and rural gas networks in Southeast Asia.
- User-friendly: Dispenser interface supports multi-language (English / Malay / Thai), easy to operate with low dependence on professional technicians.
- Extreme Environment Resistance:
- High-temperature resistant design: Operates stably above 50℃ to avoid LPG overpressure; enhanced heat dissipation and sun protection for desert climates in Saudi Arabia, UAE, etc.
- Sandstorm and salt-spray resistance: Strengthened sealing and external anti-corrosion to withstand sand and coastal salt corrosion.
- Regional Standard Compliance: Meet SASO (Saudi Arabia), ESMA (UAE), GSO Gulf standards; relevant certifications and test reports provided to match local operation modes.
- Cost-Effectiveness & Durability:
- Significant price advantage while meeting ISO 11439, ASME and other international standards, suitable for countries with limited infrastructure and budgets.
- Robust structure with high impact resistance and anti-settlement capacity, adaptable to complex geological conditions in parts of Africa.
- Easy Maintenance & Local Support:
- Universal accessories design, key components available locally in Africa to reduce spare parts cost and lead time.
- Multi-language (English / French / Arabic) operation manuals and basic maintenance training to enable local teams to master equipment management quickly.
- Multi-scenario Application: Serves urban buses, mining fleets, civil and industrial & commercial users, supporting energy infrastructure construction and clean fuel promotion in Africa.
